2023年全國碩士研究生考試考研英語一試題真題(含答案詳解+作文范文)_第1頁
已閱讀1頁,還剩15頁未讀, 繼續免費閱讀

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

1、附錄引用的外文文獻及其譯文A study on the improvement of formability for elliptical deep drawing processesD.H. Parka,*, S.S. Kanga, S.B. ParkbAbstractThe punch and die corner radii, the lubricant condition, the working speed, the blan

2、k-holding force, the friction force and the clearance change the formability of the deep drawing process. In general, sheet metal forming may involve stretching, drawing or various combinations of these basic modes of de

3、formation. The influence of the punch and die corner radii is of great importance in the design of sheet metal working processes. Recently, most of the research for the sheet metal deep drawing process has been performed

4、 on the formability of an axisymmetric shape, but there are not any concrete reports on the formability of a non-axisymmetric shape. In addition,the conventional corner radii of the punch and die have been determined by

5、trial-and-error using industrial experience and post-processing tests, and only approximate corner radii of the punch and die have been presented. In order to obtain the optimal products in the deep drawing process, elli

6、ptical deep drawing tests were carried out with several corner radii of the punch and die. In this study, the optimal corner radii of the punch and die in the deep drawing process with a non-axisymmetric blank shape are

7、proposed.Research has been carried out using diverse technologies including experimentation and the finite element method. C 2001 Elsevier Science B.V. All rights reservedKeywords: Non-axisymmetric deep drawing; Punch co

8、rner radius; Die corner radius; Finite element method; Blank shape1. IntroductionMany research investigations for cylindrical products have been carried out into the fundamentals of the deep drawing process [1—4]. Thus,

9、this has produced many applied 90° 222 307 452.2. Experimental equipmentDeep drawing tests were carried out using a punch with a diameter of 56 mm and a die with a

10、diameter of 60 mm.Fig. 1 presents the dimensions of the tools used in the first drawing process. The clearance and the corner radii of the punch and die are listed in Table 2. The forming sequence for the product consist

11、s of three processes which are: (a) first drawing; (b) redrawing; (c) elliptical drawing. The corner radii of the punch (Rp) and die (Rd) were different for each process. The initial blank-holder force was determined as

12、the minimum force that could prevent the wrinkling of the blanks and was kept constant during the test for each blank.Elliptical deep drawing tests were performed at various corner radii in a 300 t mechanical press. The

13、corner radii of the punch and die in first drawing were the three types mentioned in Table 3.Fig. 1. Dimensions of the tools (mm) used in the first drawing process.Table 2 Corner radius and clearance (t= 1.6 mm)Process

14、 Corner radius (mm) Clearance (mm)First drawing Rp =15, Rd = 10 2 (1.25 t)Redrawing Rp =12, Rd = 8 2 (1.25 t)Elliptical drawing Rp =8

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 眾賞文庫僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論